The mineral water filter line VAIAK5000 - 5000 l / h is a product of scientific and technical progress in recent years. It has helped many business units get rich quickly and serve and supply pure mineral water to consumers.
However, installing and operating this line system is not as simple as we thought, especially needing to pay attention to the time to replace the filter material of the system, other details and machines, ... these components determine the output quality of the water source.
In order to help customers have the basic knowledge about this mineral water filter line, Viet An will list some points below.
Treatment method of hard water for mineral water filter line VAIAK 5000
In order to soften hard water, there are many ways but to choose the most suitable method, it is necessary to base on the hardness of the water, the source water quality and other criteria. Viet An would like to introduce water softening method with ion exchange resin particles as follows: Ion exchange method: softening water with cationic particles. This is a kind of plastic beads with good ion exchange capacity, stable temperature. When soaked in water, these substances absorb the cation of dissolved salts on the surface of the grain and release the equivalent amount of cation to the water. VAIAK5000 includes 4 stages, recirculated:
- Soft water softening column contains cationic particles covered by a layer of sodium ion. When hard water flows through, these particles act as a magnet, sucking all the hard ions that displace water with sodium ions.
- The ion exchange resin particles are then saturated with mineral ions and need to discharge and recharge. This regeneration process is controlled by the automatic valve of the filter column system.
- At this stage, the reconstituted salt will be pushed up by the booster pump to the crude filter column, rinsing out saturated cationic particles of water hardening ions.
- The wastewater then contains ions and salt water is released. Recycled plastic particles are ready for the new processing.
Water filter core of mineral water filter line VAIAK 5000
The water filter core is one of the important parts, which affects the performance of the entire filtration line. If you use conventional filters for VAIAK 5000 water line, although the price is cheaper, it will reduce the life of the product, in addition to causing damage, clogging of membranes, especially is the substandard quality of the finished product, cannot be used. More serious if you continue to use these water sources can cause dangerous diseases, negatively affecting the health of people who use them as well as destroying the environment.
In Viet An, we always want to bring the best quality products, the best optimal, the Company has invested in intelligent, high-quality mineral water filter cores 5000 L / h, bringing maximum efficiency when removing impurities, bacteria, viruses that exist in water sources, bring more satisfaction and peace of mind to customers.
Effect of replacing periodic filter materials of VAIAK 5000
When replacing filter materials, filter cores, filters periodically will help the system work more stable, provide enough water for the pump to operate, protect RO membranes and avoid the risk of the system must stop operating.
Filter materials such as Mn-activated carbon and cationic particles only absorb and exchange ions for a specified period. When the particles reach a saturation state, they need to be reconstituted and cleaned to restore surface absorption. Although you are quite careful in reverting regularly, the filter material is still in time and reduces the water filtration effect, so it needs to be replaced periodically to ensure the water filter effect of the materials is not reduced.
Replace the RO membrane of mineral water filter line of 5,000 L / h
The time of RO membrane replacement depends greatly on the source of water input, water contaminated with calcium, Mg, Mn, ..., the time of RO changing membrane will be sooner.
Dirty filter particles, which do not perform well with the pre-filter function, it will force the RO membrane to work more, and this is the reason why RO membranes are clogged.
When replacing filters, filter core, and filter materials, you should choose a genuine good with a clear origin. Do not because of cost savings which purchase of unknown origin goods, because if you buy inferior quality will significantly affect the quality of mineral water after filtering, and consumers will evaluate your product is not good, mean you are killing your own business, killing your production facilities.
For more information of VAIAK 5000 mineral water filter line or you want to replace filter components, filter materials, please call Hotline: 0949 41 41 41 of Viet An for the fastest support. Sincerely thank!