Exporting ice machine of 5 tons, 3 tons and VACC400 water filtration line for Ms. Dao in Ninh Thuan

Viet An General Trading Joint Stock Company is one of the companies with rich experience in the field of ice making machines and water filtration lines. Established in 2008, after more than 10 years of operation, Viet An's products have always received good feedback and trust from customers. Viet An water filtration system is trusted by many companies, factories, hospitals and schools, ... and is supported to install nationwide. Therefore, Ms Dao from Ninh Thuan has trusted and selected Viet An as a co-operative unit to install IVA5T and IVA3T ice machine and VACC400 liter / h water filtration line to serve the production and business of his unit.

IVA5T and IVA3T ice cube making machine

Clean ice cubes are increasingly popular in daily life and especially in the hot season. Ice making machine is an ideal product for Ms Dao, when she wants to create her own clean, pure ice without having to depend on external ice trading facilities.

In Ninh Thuan, there is a modern life with a developed scientific and technological foundation, the people's living standard is improved, the economic life is developed but at the same time it is accompanied by environmental pollution, air pollution and especially is water pollution. That motivates people to choose the best for the body, choosing clean foods, and safe, natural drinking water that is healthy and beautiful. To solve the most urgent problem, Ms Dao decided to sign a contract of 111/2019 5-ton, 3-ton ice machine and 400-liter water filtration line with Viet An to ensure the supply. ice cubes and clean water meeting food safety standards in Ninh Thuan.

Operating process of ice machine Ms Dao chooses

In order to have pure ice products meeting food safety and hygiene standards for consumer markets: Ms Dao should note that there are two deciding factors that are the quality of the ice machine and the quality of water put in to produce ice. Regarding the water source, Ms Dao needs to prepare the underground water source or the bore well water to meet the requirements of the water source. Regarding the quality of ice making machine, Ms Dao can be completely assured because we are committed to bringing customers superior quality products with the latest technology.

The process of ice making machine is as follows:

From the source of the water through the filtration process is taken to the lower reservoir of the ice machine, then they are pumped to the upper reservoir (top of the millstone) - then the water is poured into the ice pipes with iNox. When entering the ice mortar, the water will gradually snow.

We use a special solvent (gas R22). Thanks to the compressor motor, the compressor converts the solvent from a liquid into a gas (vapor). This gas is pushed through an ice motar, where the gas ice motar is indirectly exposed to water through the contact surface of stainless steel pipes. Here the process of heat exchange occurs: The gas vapor collects the heat of the water, causing the temperature of the water to gradually decrease to the proper negative temperature, the water molecules will crystallize, freeze water into ice, and vapor after the endothermic of water they will turn into liquid solvent and pushed to the compressor to continue the process.

After a period of 40 to 45 minutes, the packed stone will turn to defrost mode, to make the ice separate from the pipe, people use hot gas and melt a thin layer of ice bar and it leaves the pipe. When it falls below it will be cut stone (made from iNox) cut into short pieces according to the preset size. Then continue the process of freezing - thanks to the lake with mechanical buoys, the water from where will be filled from there. And the ice making process continues.

Some new technologies are completely designed for Viet An ice machine

• Liquid and gas separation systems (100% new technology - unique to Viet An ice making machine). Viet An's air separation system has the ability to remove fluid and return it to the air way. Keep the compressor from being contaminated to avoid the risk of failure and save power. With this system, the pipe of the ice maker machine is also more streamlined, making the ice production cycle faster.
• The electrical system for Viet An ice making machine is fully programmed automatically. Make sure the ice machine runs smoothly in one button. Automatically disconnect when something goes wrong. With an array of LED lights to accurately indicate the status of your device. The machine runs the entire process of ice making, automatically disconnects when there is an electrical problem, automatically adjusts ice making time to have satisfied hollow ice.
• Throttle valves are imported from Japan to regulate the flow of water through the refrigerant. From there, increase the cooling speed, accelerate the time to produce finished ice.
• The compressor used in Viet An 10-ton ice block machine is 100% new. Currently, in the Vietnam market, only ice maker machines of Viet An have new compressor 100% - helping control cooling capacity more effectively. The compressor used for ice machine is an air compressor. So the compressor that pushes out must be gas, and the suction must be air. The gas that is produced is hot air and the gas that is drawn in is cold air. Produced on a fully automated CMC system, automatic cutting, stamping, and molding. It is then transferred to the high-pressure testing section of the compressor. This unit uses the best high pressure testing technology in the world imported from Germany.

How does VACC400 - 400 liter water filtration line produce pure water?

VACC400 has the ability to turn dirty, unsanitary water into pure, clean water to serve the needs of use, production and business and contribute to the protection of human health. With a completely closed water filtration process, the components that make up the 400 liter bottled water filtration line are all imported from advanced countries like the US, UK, Japan, and South Korea. In the long run, the water purifier works stably.

 

VACC400 water filtration line

Operating the VACC400 water filtration line easily, Ms Dao can use it easily.

The 3-valve mechanical valve system is imported directly from the United States with high durability, just gentle adjustment can wash the filter column quickly. They are mounted on each filter column, which is called a 3-valve valve because they can rotate in 3 different directions. When performing the cleaning of the filter column, she just needs to adjust the valve in three directions with her hand and the water in the column will be pumped to rinse the filter column and flush out the residual substances stuck in the filter column. Time to wash the filter column of this water filtration system will take about a few minutes. The average service life of VACC400 water filtration system provided by Viet An is from 10 to 15 years.

Besides, Ms Dao should also note that using ice making machine should:

• Installing the machine in a cool place away from sources of heat will directly affect the quality of ice cubes and the cooling capacity of the machine causing power loss.
• Water supplied to the machine must be treated through a water filtration system that has inlet pipes and wastewater properly.
• Maintenance of ice making machines and water purification lines is usually required to increase the life of the machine and to avoid minor undetermined failures that will affect the machine. If for a long period of inactivity, remove the trays and water supply lines to clean and prevent mold and bacteria from growing.

Thank Ms Dao for trusting and accompanying Viet An, we are committed to giving you the best and thoughtful after-sales service. Customers wishing to buy ice machine or water filtration line can contact the hotline 0949 41 41 41 or our nearest branches for advice and support. Viet An sincerely thank you!